Home Measurement Services in Toledo, Ohio
A home measurement documents your house's finished square footage following the American National Standards Institute (ANSI) method that Fannie Mae requires appraisers to follow when they measure homes for the mortgages it buys. Sellers, buyers, real estate agents, and homeowners order one when they want a size figure measured by a single, published standard. Altermatt Appraisal Services provides home measurements in Toledo and throughout Northwest Ohio, including Lucas, Wood, Fulton, Ottawa, Defiance, and Williams counties.
What a home measurement covers
A home measurement finds the home's gross living area, the finished square footage on levels entirely above the ground around the house, measured to the outside of the exterior walls. Spaces that aren't part of that figure, such as the garage, unfinished areas, and below-grade levels, are reported on their own lines instead of being added to the total.
The ANSI standard behind a home measurement
A home measurement done to the ANSI Z765-2021 standard uses the same national method Fannie Mae has required since April 1, 2022 for appraisals that include an interior and exterior inspection on loans it buys. The standard is published by Home Innovation Research Labs and was written so that two people measuring the same house reach the same answer. In plain terms:
- Only finished space is counted in the finished square footage, and finished areas generally need a ceiling height of at least 7 feet. Rooms with sloped ceilings have their own rules.
- Any level that is partly or fully below grade is reported as below-grade area, even when it is finished.
- Stairs are counted on the floor they lead down from, and openings to the floor below, such as a two-story foyer, aren't counted.
- Garages and unfinished areas are not included in the finished square footage.
- The final figure is reported to the nearest whole square foot.
Above-grade and below-grade area in a home measurement
A home measurement reports above-grade and below-grade area separately, so a finished basement is listed on its own line rather than folded into the gross living area. Above-grade area is on levels entirely above the ground around the house, called grade. Below-grade area is on any level that is partly or completely below grade, such as a basement or the lower level of a walk-out home.
Who orders a home measurement
A home measurement is ordered by sellers, buyers, real estate agents, and homeowners who want an accurate square footage figure, often because a multiple listing service (MLS) listing, a county record, and an older report don't agree. Common reasons include:
- A seller wants the square footage right before the home is listed for sale.
- A buyer wants to know the size of the home they're considering.
- A homeowner wants to check the size shown in their records after an addition or other changes.
Home measurements are available for all residential property types, including single-family houses, townhomes, and condominiums. A condo unit in a multi-story building is measured from the inside of its walls, which is how Fannie Mae's guidelines treat those units.
Why home measurement figures can differ
A home measurement may not match the square footage on the county auditor's property record or in a past listing, and there are ordinary reasons for that. County records are kept for property tax purposes, and each figure you see may have been measured at a different time, by a different method, or with different spaces counted. For example:
- A record may be based on older information and not reflect later additions or remodeling.
- Some figures include below-grade or unfinished space that the ANSI standard reports separately.
- Some figures are measured from the inside of the walls instead of the outside.
What you receive from a home measurement
A home measurement results in a floor plan sketch of every improvement on the site, such as the house, a garage, and any outbuildings, with each level of the house drawn on its own. The sketch shows exterior dimensions and the square footage of each level, with above-grade area, below-grade area, and the garage reported separately.
Home measurement vs. a home appraisal
A home measurement documents the size of a house, while a real estate appraisal is an opinion of market value that weighs size along with location, condition, quality, and recent comparable sales. If you need a value too, for example before you sell, a pre-listing appraisal may be the better fit.
What to have ready for a home measurement
For a home measurement, the only thing to have ready is access to the entire house, including the basement, the garage, and any outbuildings. Interior access is preferred, and when it isn't possible, an exterior-only measurement is available and is identified as one in the results.
Home measurement timeline
A home measurement is usually delivered the next business day after the visit, which helps when you and your real estate agent are working toward a listing date. If you need the figure before you set a list price, tell us your deadline when you call.
Why choose Altermatt Appraisal Services
Your home measurement is done by Bill Altermatt, SRA, who earned the SRA designation from the Appraisal Institute and has been appraising homes in the Toledo area since 2004. He has been an Ohio Certified Residential Appraiser since 2007 and has completed nearly 8,000 appraisals. You can also see what clients say on our Testimonials page. He serves all the communities we serve.
Home measurement questions
Here are the home measurement questions sellers, buyers, and real estate agents ask most often about square footage.
Does a home measurement include the basement?
A home measurement includes the basement, but it reports it as below-grade area, separate from the above-grade gross living area. Under the ANSI standard, any level that is partly or fully below grade is reported this way, even when it is finished.
Does a home measurement include the garage and outbuildings?
A home measurement sketches the garage and any outbuildings along with the house, but the garage isn't counted in the finished square footage. The ANSI standard keeps garages and other unfinished areas out of the finished total.
Can a home measurement be done from the outside only?
Yes, a home measurement can be done from the outside when interior access isn't possible, and the ANSI standard requires the results to say it was exterior-only. Interior access is preferred because it confirms which areas count toward the finished square footage.
Why doesn't my home measurement match the county auditor's square footage?
A home measurement and the county auditor's record can differ because they may have been measured at different times, by different methods, or with different spaces counted. County records are kept for property tax purposes and may not reflect later changes to the home.
Will a lender use my home measurement?
A home measurement doesn't replace the appraisal a lender orders for a mortgage. It's for your own use, such as checking a listing or your records.
Request a quote
To request a quote for your home measurement, use the short form on our Contact Us page and tell us what the measurement is for, such as checking the square footage before your home is listed on the MLS. Bill reviews every request personally and replies, or you can call 419-754-3396. Quotes are free.
Other services we offer
If your home measurement ties into other real estate decisions, Bill handles the services below too, with the same Appraisal Institute standards.
- Divorce Appraisals in Toledo
- Estate Appraisals in Toledo
- Pre-Listing Appraisals in Toledo
- PMI Removal Appraisals in Toledo
- Tax Appeal Appraisals in Toledo
- Insurance Appraisals in Toledo
- Bail Bond Appraisals in Toledo
- IRS Appraisals in Toledo
- Bankruptcy Appraisals in Toledo
- Medicaid Appraisals in Toledo
- All appraisal services
- All service areas
- Client testimonials